Car Decal Application Guide

Thank you for your purchase of an AT Design Lab decal! For best application please follow these steps to ease the application process: 

1. Clean the window for the decal thoroughly and ensure that the window is dry before proceeding. 

2. Prepare the decal by removing the backing paper (not the clear layer).

3. Use the transfer tape to align your decal in its chosen location - be sure not to let the decal touch the window, or it will be stuck in that location! 

4. Stick the vinyl down with the transfer tape. Use a squeegee or plastic card to smooth it out and ensure the vinyl sticks, removing any bubbles that may appear. 

5. Peel back the clear transfer tape, and enjoy your decal! 

6. If any bubbles appear after application, wait 24 hours and then you can take a needle and poke a small hole into the bubble to release the trapped air. 

Please email emailatdl@gmail.com with any questions.